Latest arrival
Pack West Royal 6 Technovolt spindle capper
Stainless spindle capper / retorquer with cap elevator and pin-wheel sorter, handling caps up to 53 mm at up to 150 caps per minute.
Used Cappers • Lancing Ltd
Used capping machinery with clear, current stock listings.
Review available screw cappers and overcappers, then contact us with your cap type, neck finish and speed requirement.
Latest arrival
AROL 10 heads capping machine
Ten-head capping machine for PET bottle applications with stated capacity up to 20,000 units per hour and maximum container height of 320 mm.
Latest arrival
Relco MICS2 induction cap sealer
Stainless induction cap sealing machine on castors for closures from 20 mm to 110 mm.
AROL SINGLE HEAD AUTOMATIC SCREW CAPPER
Arol single head screw capper Model: Beta VP.SP Serial No. 1269 All stainless steel construction Fully guarded Feed direction: left to right 10 pocket bottle star wheel Approximate speed: 40- 50 bpm Overall dimensions: 1m wide x 1.1m long x 2.1
DICO AUTOMATIC OVERCAPPER
Dico fully automatic 6 head over capper complete with a 900 mm dia inclined rotary cap sorter, 6 pock bottle star wheel, vacuum cap pick up, fully guarded, set up for 34 mm dia push on capper, container 32 mm dia x 48 mm high, cap transfer turret
KING 4 HEAD ROTARY SCREW CAPPER
King 4 head rotary screw capper, Model CS120/17, all stainless steel construction, fully guarded, feed direction left to right, scroll infeed, four pocket in and outfeed star wheels, cap chute, pick and place transfer arm, three jaw spring loaded chucks
5 HEAD AVE FULLY AUTOMATIC ROTARY PICK AND PLACE SCREW CAPPER
5 Head AVE fully automatic rotary pick and place screw capper, direction of feed L-R, scroll infeed, in/outfeed star wheels, vibrating bowl cap sorter, cap release box, pick and place star wheel, full environmental guarding
No matching stock was found. Clear the filter or contact us with your requirement.
Need something different?
If you do not see the exact specification you need, contact us with the essentials below.
- Cap type
- Neck size
- Container format
- Throughput
- Any preferred manufacturer or footprint limit
Useful next steps
Keep the enquiry moving with direct contact options.
Prefer to talk through the options?
Call the sales team on 01494 623 015 or send an enquiry with your cappers requirements.
Confirm the closure-handling parts included with the used capper
Keep the capper identity and the intended container-and-closure combination together in the enquiry. Ask which chucks, gripping arrangements, feeding components or other format parts are included with the particular machine and which would require separate supply.
During an inspection or demonstration, record the actual closure and container used and the acceptance checks performed. Identify any further work needed to assess the formats you intend to run.
- Format inventory
- Request an itemised list of the included closure and container handling parts.
- Observed condition
- Record wear, missing items and proposed corrective work separately.
What if the required closure was not available for inspection?
Record the demonstration as evidence for the configuration actually used. Agree the further assessment needed for your closure before treating the application as confirmed.